hardware guide date modifed: april 24, 2012 mounting hardware applications - table 1 part number type mini d ribbon (mdr) conn.s d sub conn.s d ribbon conn.s shrunk d ribbon (sdr) conn.s sheet # ria code 3341-1l 2 jack socket screw x x 2 of 9 ria e5 & c3 apply 3341-1s 2 jack socket screw x x 3341-2 jack socket screw x 3341-3 jack socket screw x 3341-4 2 jack socket screw x x 3341-10 jack socket screw x 3 of 9 3341-13 jack socket screw x 3341-16 jack socket screw x 3341-17 jack socket screw x 3341-25 jack socket screw x 3341-30 jack socket screw x 4 of 9 3341-31 jack socket screw x 3341-32 jack socket screw x 3341-35 jack socket screw x 3341-36 jack socket screw x 3342-1 2 jack screw kits x 5 of 9 3342-2 2 jack screw kits x 3342-3 2 jack screw kits x x 3342-4 2 jack screw kits x x 3344-3 board lock screw x 6 of 9 3344-4 board lock screw x 3344-26 panel mount screw x 3344-38 panel mount screw x 3344-44 panel mount screw x 3344-45 panel mount screw x 3475-1 bail mount kits x 7 of 9 3475-4 bail mount kits x 3475-5 bail mount kits x 12600-s-08 jack socket screw x 8 of 9 12600-S-10 jack socket screw x 12600-s-12 jack socket screw x 3344-46 board lock screw x mounting hardware guide x 9 of 9 -see sheet 7 of 9 for d ribbon & plastic connector accessories.- notes: 1. use table 1 as a guide for selecting the correct mounting hardware. 2. see sheet 9 of 9 for selection guide - 9 to 37 and 50 position d sub connectors. 3. see regulatory information appendix (ria) for chemical compliance information. ts-0142-j sheet 1 of 9 3 electronic solutions division interconnect solutions http://www.3mconnectors.com 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? i/o connector mounting options and hardware
ts-0142-j sheet 2 of 9 h e x . 4 3 [10. 9 ] hex . 6 2 [ 1 5.8] h e x #4 -40 thre ad h e x . 3 0 min [7.6 ] #4 -40 th rea d #4 -40 th rea d # 4-40 thr ead #4 -40 thr ead . 3 0 [7.6 ] . 1 7 [ 4. 3 ] m3.5 t h r e ad x . 24 [ 6. 1 ] deep ? . 28 [ 7 . 1 ] ? . 19 [ 4 . 7 ] . 1 9 [4.8 ] . 1 3 [ 3 .3] . 3 0 [7.6 ] . 1 9 [4.8 ] .31 [ 7 .9] . 1 9 [4.8 ] .19 [ 4 . 8 ] . 1 9 [ 4 . 8 ] .19 [ 4 . 8 ] #4-4 0 t hr ead x . 15 [ 3 .8] d ee p # 4-40 thr ead x .09 [2.3 ] d eep #4 -40 thr ead x .26 [6.6] min deep #4 -40 th rea d x . 15 [3.8] d e e p . 3 1 [ 7 . 9 ] .43 [10. 8 ] . 3 9 [ 10.0] jack socket screws 3m part number 3341-1l material: steel finish: zinc with clear chromate screw / socket thread size: #4-40 / #4-40 recommended max. torque: 7.0 inchlbf [0.8 nm] kit contents: 2 - jack sockets 4 - spacers .031 [0.79] thick 2 - lock washers 2 - 4-40 nuts 3m part number 3341-1s material: steel finish: zinc with clear chromate screw / socket thread size: #4-40 / #4-40 recommended max. torque: 7.0 inchlbf [0.8 nm] kit contents: 2 - jack sockets 8 - spacers .031 [0.79] thick 2 - lock washers 2 - 4-40 nuts 3m part number 3341-2 material: steel finish: zinc with clear chromate screw / socket thread size: #4-40 / #4-40 recommended max. torque: 7.0 inchlbf [0.8 nm] kit contents: 2 - jack sockets 2 - lock washers 2 - 4-40 nuts 3m part number 3341-3 ieee-488-type material: steel finish: black oxide screw / socket thread size: #4-40 / m3.5 recommended max. torque: 7.0 inchlbf [0.8 nm] kit contents: 2 - jack sockets 4 - spacers .031 [0.79] thick 2 - lock washers 2 - 4-40 nuts 3m part number 3341-4 material: steel finish: zinc with clear chromate screw / socket thread size: #4-40 /#4-40 recommended max. torque: 7.0 inchlbf [0.8 nm] kit contents: 2 - jack sockets 4 - spacers .031 [0.79] thick 2 - lock washers 2 - 4-40 nuts 3 electronic solutions division interconnect solutions http://www.3mconnectors.com 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? i/o connector mounting options and hardware
ts-0142-j sheet 3 of 9 ? . 16 [ 4 . 0 ] . 3 5 [ 8.9] . 0 3 [ 0 . 8 ] m2. 5 t hr e a d x .23 [5.8 ] dee p m 2 .5 thread t hread lo ck i ng mate ria l .35 [8.9 ] . 0 3 [ 0 . 8 ] #4-40 thr ead x .23 [5.8 ] dee p m 2 .5 thread t hread lo ck i ng mate ria l ? . 19 [ 4 . 8 ] ? . 16 [4.0 ] . 3 5 [8.9 ] . 0 3 [ 0 . 8 ] #4-40 thr ead x .23 [5.8 ] dee p #4-40 thr ead t hread lo ck i ng mate ria l ? . 16 [4.0 ] . 3 5 [ 8 . 9 ] . 0 3 [ 0 . 8 ] #4-40 thr ead x .23 [5.8 ] dee p #4-40 thr ead t hread lo ck i ng mate ria l ? . 19 [ 4 . 8 ] ? . 16 [4.0 ] . 0 3 [ 0 . 8 ] m2 t hr e a d x .12 [3.0 ] dee p m 2.5 thr ead t hread lo c k i ng mate ria l ? . 16 [4.0 ] ? . 1 9 [4.8 ] .03 [0.8 ] .03 [0.8 ] . 0 5 [1.3 ] . 1 2 [3. 0] .30 [7.6] . 3 0 [7. 6] . 3 0 [7.6 ] .30 [ 7.6] .41 [10.4] 3m part number 3341-10 material: stainless steel screw / socket thread size: m2.5 / m2.5 recommended max. torque: 2.5 inchlbf [0.3 nm] 3m part number 3341-13 material: stainless steel screw / socket thread size: m2.5 / #4-40 recommended max. torque: 2.5 inchlbf [0.3 nm] 3m part number 3341-16 material: stainless steel screw / socket thread size: #4-40 / #4-40 recommended max. torque: 3.5 inchlbf [0.4 nm] 3m part number 3341-17 material: stainless steel screw / socket thread size: #4-40 / #4-40 recommended max. torque: 3.5 inchlbf [0.4 nm] 3m part number 3341-25 material: stainless steel screw / socket thread size: m2.5 / m2 recommended max. torque: 2.5 inchlbf [0.3 nm] 3 electronic solutions division interconnect solutions http://www.3mconnectors.com 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? i/o connector mounting options and hardware
ts-0142-j sheet 4 of 9 . 5 0 [ 12. 7 ] . 0 3 [0. 8 ] #4-40 th r ead x .23 [5.8] min deep m 2 .5 th r ead ? . 1 9 [ 4 . 8 ] ? . 1 6 [ 4 . 1 ] . 7 0 [ 17. 8 ] . 0 3 [ 0 . 8 ] m 2 .5 th r ead threa d l o cking m a teri a l ? . 1 6 [ 4 . 1 ] m2. 5 thread x . 1 0 [ 2 . 5 ] d eep m2. 5 thread thr e a d l o cking m a t e r i a l . 0 3 [ 0 . 8 ] . 4 0 [ 1 0 . 2 ] #4- 4 0 thre a d ? . 1 9 [ 4 . 8 ] ? . 1 6 [ 4 . 1 ] . 0 3 [0. 8 ] . 1 5 [ 3 . 8 ] th r ead locki n g mat erial . 0 3 [ 0 . 8 ] . 3 0 [ 7 . 6 ] . 3 0 [ 7 . 6 ] . 4 1 [ 1 0 . 4 ] . 0 3 [ 0 . 8 ] ? . 1 9 [ 4 . 8 ] . 1 2 [ 3 . 0 ] . 0 3 [ 0 . 8 ] # 4 - 40 th read x . 10 [ 2 . 5 ] d e e p # 4 -40 threa d x . 23 [ 5 . 8 ] de e p . 4 0 [ 1 0 . 2 ] m2. 5 t h r e a d ? . 1 9 [ 4 . 8 ] ? . 1 6 [ 4 . 1 ] . 0 3 [0. 8 ] . 1 5 [ 3 . 8 ] th r ead locki n g mat erial . 0 3 [ 0 . 8 ] # 4 - 40 th read x . 10 [ 2 . 5 ] d e e p 3m part number 3341-30 material: stainless steel screw / socket thread size: #4-40 / #4-40 recommended max. torque: 3.5 inchlbf [0.4 nm] 3m part number 3341-31 material: stainless steel screw / socket thread size: m2.5 / #4-40 recommended max. torque: 2.5 inchlbf [0.3 nm] 3m part number 3341-32 material: stainless steel screw / socket thread size: m2.5 / #4-40 recommended max. torque: 2.5 inchlbf [0.3 nm] 3m part number 3341-35 material: stainless steel screw / socket thread size: m2.5 / #4-40 recommended max. torque: 2.5 inchlbf [0.3 nm] 3m part number 3341-36 material: stainless steel screw / socket thread size: m2.5 / m2.5 recommended max. torque: 2.5 inchlbf [0.3 nm] 3 electronic solutions division interconnect solutions http://www.3mconnectors.com 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? i/o connector mounting options and hardware
ts-0142-j sheet 5 of 9 . 5 6 [ 14. 1 ] . 1 9 [ 4 . 8 ] . 2 2 [ 5 . 6 ] . 1 1 [ 2 . 7 ] ? . 1 8 [ 4 . 6 ] ? . 0 8 [2. 0 ] ? . 1 8 [ 4 . 6 ] . 1 1 [ 2 . 7 ] . 6 2 [ 1 5 . 7 ] . 2 5 [ 6 . 4 ] # 4 - 4 0 t h r ead . 1 2 [ 3.0] . 3 5 [ 8 . 9 ] . 1 0 [ 2 . 5 ] ? . 1 8 [ 4 . 6 ] . 1 0 [ 2 . 5 ] clip s pac e r ? . 22 [ 5.6] . 0 3 [ 0 . 8 ] ? . 1 8 [ 4 . 6 ] . 1 1 [ 2 . 7 ] . 6 2 [ 1 5 . 7 ] . 3 5 [ 8 . 9 ] . 1 0 [ 2 . 5 ] ? . 1 8 [ 4 .6] # 4 - 40 t h read . 1 0 [ 2 . 5 ] ? . 0 8 [ 2 . 0 ] ? . 0 8 [ 2 .0] ? . 0 8 [ 2 . 0 ] # 4 - 4 0 t h r ead # 4 - 4 0 t h r ead #4-4 0 t h r ead jack screw kits 3m part number 3342-1 material: steel finish: zinc with clear chromate thread size: #4-40 recommended max. torque: 7.0 inchlbf [0.8 nm] 3m part number 3342-2 material: steel finish: zinc with clear chromate thread size: #4-40 recommended max. torque: 7.0 inchlbf [0.8 nm] 3m part number 3342-3 material: steel finish: zinc with clear chromate thread size: #4-40 recommended max. torque: 7.0 inchlbf [0.8 nm] 3m part number 3342-4 material: steel finish: zinc with clear chromate thread size: #4-40 recommended max. torque: 7.0 inchlbf [0.8 nm] kit contents: 2 - clips 2 - jack screws kit contents: 2 - spacers 2 - jack screws kit contents: 2 - screws 2 - jack screws 3 electronic solutions division interconnect solutions http://www.3mconnectors.com 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? i/o connector mounting options and hardware
ts-0142-j sheet 6 of 9 .2 4 n o m. [ 6 .0] . 079 m a x [ 2 .00 ] . 2 5 n o m . [6.4 ] .075 m a x [1.91] .3 1 n o m. [8.0 ] . 071 m a x [1.80] . 3 1 n o m . [8. 0 ] .071 m a x [1.80] . 3 75 nom . [9.5 2 ] . 075 m a x [ 1 .91 ] ? . 2 0 m a x [5.0 ] ? . 1 8 m a x [ 4 . 5 ] ? . 1 8 m a x [4.5 ] ? . 1 8 m a x [4.5 ] ? .18 m a x [4.5 ] . 3 1 n o m . [8. 0 ] .071 m a x [1.80] ? . 1 8 m a x [4.5 ] 3m part number 3344-3 material: steel finish: nickel plated thread size: m2.5 recommended max. torque: 2.5 inchlbf [0.3 nm] board lock screws use to attach connector to printed circuit board. not for use for panel mounting. 3m part number 3344-4 material: steel finish: nickel plated thread size: #4-40 recommended max. torque: 3.5 inchlbf [0.4 nm] 3m part number 3344-26 material: steel finish: zinc thread size: m2.6 recommended max. torque: 2.5 inchlbf [0.3 nm] 3m part number 3344-38 material: steel finish: zinc thread size: m2.5 recommended max. torque: 2.5 inchlbf [0.3 nm] 3m part number 3344-44 material: steel finish: zinc thread size: #4-40 recommended max. torque: 3.5 inchlbf [0.4 nm] panel mount screws use to attach connector to panel or chassis. not for use for pcb mounting. .2 4 n o m. [ 6 .0] . 079 m a x [ 2 .00 ] . 2 5 n o m . [6.4 ] .075 m a x [1.91] .3 1 n o m. [8.0 ] . 071 m a x [1.80] . 3 1 n o m . [8. 0 ] .071 m a x [1.80] . 3 75 nom . [9.5 2 ] . 075 m a x [ 1 .91 ] ? . 2 0 m a x [5.0 ] ? . 1 8 m a x [ 4 . 5 ] ? . 1 8 m a x [4.5 ] ? . 1 8 m a x [4.5 ] ? .18 m a x [4.5 ] . 3 1 n o m . [8. 0 ] .071 m a x [1.80] ? . 1 8 m a x [4.5 ] 3m part number 3344-45 material: stainless steel thread size: m2.5 recommended max. torque: 2.5 inchlbf [0.3 nm] 3 electronic solutions division interconnect solutions http://www.3mconnectors.com 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? i/o connector mounting options and hardware
ts-0142-j sheet 7 of 9 d-ribbon & plastic connectors contact quantity mating connectors junction shell strain relief pull-tab plug socket plastic 14 3572-100x 3573-100x 3485-1800y 3448-60 3490-2 24 3548-100x 3549-100x 3485-1700y 3448-61 3490-2 36 3366-100x 3367-100x 3485-2800y 3448-62 3490-3 50 3564-100x 3565-100x 3485-2500y 3448-63 3490-5 bail mount kits for d ribbon connectors 3475-1 3475-4 3475-5 detail a plastic connectors mounted to front of panel plastic & metal faced connectors mounted to rear of .0625, .075, .125 panels plastic & metal faced connectors mounted to rear of .035, .042, .094 panels kits contain 2 ea. bail assy. screw - 4-40 x .50. rnd hd sltd nut - #4-40 unc washer - lock-split inch [mm] .1 .01 tolerance unless noted .0 .00 .000 inch [ ] dimensions for reference only .005 options: x = mounting style y = f for fat cable, r for round cable material bail assy. steel, zinc plated screw steel, zinc plated nut steel, zinc plated washer steel, zinc plated 3 electronic solutions division interconnect solutions http://www.3mconnectors.com 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? i/o connector mounting options and hardware
ts-0142-j sheet 8 of 9 ? . 1 5 [ 3 . 8 ] max . 1 9 7 [ 5 . 00] . 2 1 [ 5 . 3 ] t h read loc ki n g mat e rial . 0 4 [ 1 . 0 ] ? . 1 5 [ 3 . 8 ] max m2 t h read x . 13 [ 3 . 4 ] d eep . 1 9 [ 4 . 8 ] .22 [ 5 . 6 ] .04 [ 1 . 0 ] pane l t h i c k ness pane l t h i c knes s m2 t h r ead t h read loc ki n g mat e rial m2 thread . 0 4 [ 1 . 0 ] ? . 1 5 [ 3 . 8 ] max m2 t h re ad x . 1 3 [ 3 . 4 ] deep . 1 8 [ 4 . 6 ] .23 [ 5 . 8 ] .04 [ 1 . 0 ] pane l t h i c kn ess thre ad locki n g m ate r i a l m2 t h read .05 [ 1 . 2 ] ? . 1 6 [ 4 . 0 ] . 2 0 [ 5 . 0 ] .07 [ 1 . 7 ] m2 t h r ead x . 1 3 [ 3 . 4 ] deep .03 [ 0 . 8 ] 3m part number 12600-s-08 for .03 [0.8 mm] panel thickness material: steel finish: nickel plated screw / socket thread size: m2 / m2 recommended max. torque: 2.5 inchlbf [0.3 nm] 3m part number 12600-S-10 for .04 [1.0 mm] panel thickness material: steel finish: nickel plated screw / socket thread size: m2 / m2 recommended max. torque: 2.5 inchlbf [0.3 nm] 3m part number 12600-s-12 for .05 [1.2 mm] panel thickness material: steel finish: nickel plated screw / socket thread size: m2 / m2 recommended max. torque: 2.5 inchlbf [0.3 nm] 3m part number 3344-46 material: stainless steel thread size: m2 recommended max. torque: 2.5 inchlbf [0.3 nm] jack socket screws use to attach connector to panel or chassis. not for use for pc board mounting. board lock screw use to attach connector to printed circuit board. not for use for panel mounting. 3 electronic solutions division interconnect solutions http://www.3mconnectors.com 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? i/o connector mounting options and hardware
ts-0142-j sheet 9 of 9 d sub connectors mounting hardware guide selection guide - 9 to 37 position d sub connectors 1. to mount a connector to a panel, select the correct jack socket kit from table 1. 2. to secure a mating connector to a panel mounted connector, select the correct jack screw kit from table 2. 3. to secure two connectors together in a mid-span application where no panel exists, select both the jack socket kit and jack screw kit from table 2. panel mounted connectors jack socket kits panel thickness front mount rear mount kit spacers kit spacers 1/16 3341-1l 2 3341-1l 0 3/32 3341-1l 2 3341-1s 1 1/8 3341-4 2 3341-1s 0 note: spacers placed under head of jack sockets junction shell connectors with junction shells jack screw kit spacers jack socket kit ----- 3342-1 ----- 3341-1l 3485-2x00 3342-2 2 3341-4 3357-41xx 3342-2 2 3341-4 3357-51xx 3342-2 2 3341-4 3357-65xx 3342-x supplied ----- 3341-4 3357-92xx 3342-x supplied or 3341-7 3341-1l notes: 1. jack sockets used for midspan applications. 2. spacers placed under head of jack screws. selection guide - 50 position d sub connectors see ts-0034 socket and ts-0035 plug . mounting options using 3357-9250 junction shell & 3505-62 latch bracket. see ts-0245. front panel mounted connectors: connectors not designed for this application rear panel mounted connectors: 1/16" panel:1 spacer latch bracket and panel 3/32" panel:no spacers. >3/32" panel:latch bracket not designed for these applications. mid-span applications: mount latch bracket directly to either the plug or socket connector. 3 electronic solutions division interconnect solutions http://www.3mconnectors.com 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? i/o connector mounting options and hardware
important notice all statements, technical information, and recommendations related to 3ms products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. before using this product, you must evaluate it and determine if it is suitable for your intended application. you assume all risks and liability associated with such use. any statements related to the product which are not contained in 3ms current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized offcer of 3m. warranty; limited remedy; limited liability. this product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3m makes no other warranties including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. if this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3ms option, to replace or repair the 3m product or refund the purchase price of the 3m product. except where prohibited by law, 3m will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3m product, regardless of the legal theory asserted. please recycle. printed in usa. ? 3m 2012. all rights reserved. ria-2217b-e 3 3m electronics solutions division 6801 river place blvd. austin, tx 78726-9000 u.s.a. 1-800-225-5373 www.3mconnectors.com 3m is a trademark of 3m company.
|
